+86-17757302351

Wholesale Multi Color MCM Flexible Stone Veneer Bendable Soft Tile Wall Panel Suppliers

Home / Product / Stone Wall Panels / Soft Stone Wall Panels / Multi Color MCM Flexible Stone Veneer Bendable Soft Tile Wall Panel

Multi Color MCM Flexible Stone Veneer Bendable Soft Tile Wall Panel

A full color range of flexible stone sheets in green, blue, red, purple, sand and black, with marble vein, herringbone, board-formed and rough stone finishes. Thin MCM veneer that curves around walls and display fixtures.

  • Finishes: marble vein, herringbone relief, board-formed lines, rough stone grain
  • Body: mineral powder, stone powder, plant fibers and fiber mesh
  • Sheet size: 610 x 1220 mm or 1200 x 2400 mm
  • Thickness: 2 mm to 8 mm
  • Water absorption: 0.5%, density about 2.6 g/cm3
  • Surface: waterproof, stain resistant, mold proof, flame retardant
  • Fitting: glue and grout, up to 30% faster than natural stone

Free samples and custom color matching available.

  • Specification
  • About Longtime
  • Contact Us

Multi Color MCM Flexible Stone Veneer for Curved Walls, Display Walls and Brand Spaces

Most stone-look cladding comes in a handful of beige and grey tones. This flexible stone range goes much further. The display wall shown above carries forest green, teal, sage, cobalt blue, burgundy, deep purple, navy, camel sand and black sheets side by side, each with its own surface pattern. Designers can pick one bold tone for a single statement wall or mix several to build a feature that matches a brand palette.

Every sheet is a thin MCM soft stone veneer pressed from mineral powder, stone powder and plant fibers on a fiber mesh base. The sheets bend by hand, which is why the sample wall can sweep in wide curves instead of stopping at straight corners. Where rigid stone, tile or panel boards need cutting into segments, a flexible sheet simply follows the line of the wall.

Ultra-thin flexible stone sheets in several colors with bendable and easy to cut features

Color and Surface Finishes

The sample wall shows four main kinds of surface:

  • Marble vein look: flowing bands of light and dark in blue and burgundy, similar to polished veined stone but with a soft matte feel.
  • Herringbone relief: a fine chevron pattern pressed into a black sheet, catching light from low angles.
  • Board-formed lines: shallow horizontal grooves in sage green, close to cast concrete formwork.
  • Rough stone grain: crinkled, hand-worked texture in navy, camel sand and black.

Not every shade is limited to one surface. If you need a particular color on a different pattern, or a custom tone matched to a brand sample, send us the reference and we will work out a sample for you.

Nine flexible stone color samples held up against an outdoor background

Key Specifications

MaterialNatural mineral powder, stone powder, plant fibers, lightweight flexible materials
DensityApprox. 2.6 g/cm3
Compressive strengthUp to 80 MPa, varies by model and substrate
Water absorption0.5%
Sizes610 mm x 1220 mm, 1200 mm x 2400 mm
Thickness2 mm to 8 mm
Waterproof and stain resistanceExcellent
Fitting speedUp to 30% faster than traditional stone

Why Designers Pick Colored Soft Stone

  • Strong color without paint or wallpaper that peels, since the color is part of the pressed surface.
  • Curved and wave-shaped layouts that rigid boards cannot follow.
  • Light sheets that put little extra load on the wall or ceiling frame.
  • A waterproof, mold proof face that wipes clean in busy public spaces.
  • Flame retardant stone powder body for commercial interiors.
  • Easy trimming with metal shears for niches, shelves and edges.
Flame, water and wear tests on a flexible stone sheet

Suggested Uses

Bright and deep tones suit places where the wall is part of the design message:

  • Retail stores, brand showrooms and pop-up shops
  • Cafes, bars, restaurants and hotel lounges
  • Kids spaces, studios, galleries and exhibition booths
  • Reception walls and staircase surrounds
  • Curved columns, counters and display plinths
  • Outdoor accent walls and entrance frames
Colored stone look wall panels behind a boutique counter and beside a curved stair
Flexible stone cladding in a bathroom corner and on an outdoor shop wall

Planning a Curved Layout

For a wave or arc wall, first measure the tightest curve and tell us the radius. Thinner sheets turn more easily, while thicker sheets feel firmer on flat runs. We can recommend a mix of thicknesses for one project if the wall has both straight and curved parts. A free sample set helps you check how the color looks under your own lighting before the full order.

Fitting Steps

  1. Clean the base wall and make sure it is firm and dry.
  2. Spread glue on the back of the sheet.
  3. Press the sheet in place and follow the curve of the wall.
  4. Tape the edges, then press grout into the joints.
  5. Remove the tape after the grout has dried.
Fitting guide for flexible stone sheets with glue, tape and grout

Frequently Asked Questions

Are all the colors on the sample wall available?

The wall shows the range of colors and finishes we can produce. Tell us which tones you need and we will confirm availability and sample time.

Can I get a color that is not listed?

Yes. Custom shades can be matched to a brand color or design reference for project orders.

Will strong colors fade over time?

The surface layer is designed to resist water and sunlight without fading. For a long outdoor run, test a sample on site first.

Can sheets of different colors be installed together?

Yes. All sheets use the same fitting method and thickness range, so several colors can share one wall, with grout lines chosen to suit the layout.

How do I get samples?

Free samples are available. Send us your color list, finish choice and delivery address.

Ask for free color samples, a quotation or a custom shade of this multi color flexible stone veneer. Share your layout, curve size and project type and we will suggest the right colors, thickness and quantity.

Haining Longtime Industry Co., Ltd is China Wholesale Multi Color MCM Flexible Stone Veneer Bendable Soft Tile Wall Panel Suppliers and Multi Color MCM Flexible Stone Veneer Bendable Soft Tile Wall Panel Company, established in 2005, our factory started with producing PVC Ceiling and Wall Panels, and has grown to be a professional China PVC ceiling panels manufacturer and a wholesale PVC panels factory, committed to providing our customers with high-quality products and services. After 20 years of development, we now own 5 large factories: Haining Halong PVC Ceiling Factory, Haining Longtime Film Factory, Guangxi PVC Wall Panel Factory, Indonesia PVC Wall Panel Factory, and Vietnam PVC Wall Panel Factory. Our main products include: PVC Ceiling Panels, PVC Wall Panels, WPC Wall Panels, Hot Stamping Foil, PVC Lamination Film, SPC Flooring, WPC Decking, and other related products. Our annual sales can reach up to 35 million USD. We offer Multi Color MCM Flexible Stone Veneer Bendable Soft Tile Wall Panel for sale.
Haining Longtime Industry Co., Ltd.

About Us

Established in 2005, our factory started with producing PVC Ceiling and Wall Panels, and has grown to be a professional China PVC ceiling panels manufacturer and a wholesale PVC panels factory, committed to providing our customers with high-quality products and services. After 20 years of development, we now own 5 large factories: Haining Halong PVC Ceiling Factory, Haining Longtime Film Factory, Guangxi PVC Wall Panel Factory, Indonesia PVC Wall Panel Factory, and Vietnam PVC Wall Panel Factory. 

Our main products include: PVC Ceiling Panels, PVC Wall Panels, WPC Wall Panels, Hot Stamping Foil, PVC Lamination Film, SPC Flooring, WPC Decking, and other related products. Our annual sales can reach up to 35 million USD.

Honour

  • Certificate
  • Certificate
  • Certificate
  • Certificate
  • Certificate

News