+86-17757302351

Wholesale Ribbed MCM Flexible Sandstone Tile Bendable Soft Stone 3D Wall Panel Suppliers

Home / Product / Stone Wall Panels / Soft Stone Wall Panels / Ribbed MCM Flexible Sandstone Tile Bendable Soft Stone 3D Wall Panel

Ribbed MCM Flexible Sandstone Tile Bendable Soft Stone 3D Wall Panel

Warm sand flexible stone sheet with deep ribbed grooves and a pitted, hand-worked stone surface. A thin MCM sandstone tile that adds soft 3D relief to calm interiors.

  • Look: sand beige, ribbed 3D relief, natural pitted grain
  • Body: mineral powder, stone powder, plant fibers and fiber mesh
  • Sheet size: 610 x 1220 mm or 1200 x 2400 mm
  • Thickness: 2 mm to 8 mm
  • Density: about 2.6 g/cm3
  • Water absorption: 0.5%
  • Surface: waterproof, stain resistant, mold proof, flame retardant
  • Fitting: glue and grout, up to 30% faster than natural stone

Free samples available on request.

  • Specification
  • About Longtime
  • Contact Us

Ribbed Sand Beige MCM Flexible Sandstone Tile with 3D Relief for Calm Interiors

Run a hand across this sheet and the grooves are the first thing you notice. Deep, evenly spaced ribs travel along the face, and between them the stone is pitted and slightly rough, like sandstone worn by wind. The color is a warm sand beige that sits comfortably beside linen, pale timber, dried grasses and honed stone slabs. It gives a wall quiet movement without any bold pattern.

Underneath the relief is a thin MCM soft stone sheet that bends smoothly. In the photo above the panel arcs over a curve and still holds its ribbed shape, which shows how well it suits rounded walls, arched niches and wrapped columns. The same sheet can also be laid flat for a straight accent wall.

Lightweight flexible stone sheet with a rough sand tone surface curving over a ledge

How the Ribbed Surface Behaves

Because the grooves are deep, light creates thin shadow lines that shift from morning to evening. With side lighting such as wall washers or LED strips the lines grow stronger, while soft overhead light gives a gentler effect. Run the ribs vertically to make a ceiling feel higher, or horizontally to widen a narrow room. Pitting and small variations in the sand tone are part of the natural look, so no two stretches of wall look mechanical.

Specifications at a Glance

Tile type MCM flexible stone, sand beige ribbed relief
Composition Natural mineral powder, stone powder, plant fibers and other lightweight flexible materials
Physical density Approx. 2.6 g/cm3
Compressive strength Up to 80 MPa (varies by model and substrate)
Water absorption 0.5%
Water and stain resistance Excellent
Standard sheet sizes 610 mm x 1220 mm and 1200 mm x 2400 mm
Thickness 2 mm - 8 mm
Time on site Up to 30% faster than traditional stone

Strength Inside a Thin Sheet

The sheet is formed in a single press. A textured outer layer carries the sand tone and relief, a core of natural inorganic stone powder gives it a firm body that resists aging, and a fiber reinforced mesh lets it flex without cracking apart. This layered build also means the surface does not shed powder when you touch it or trim it.

Layered structure of a flexible sandstone tile with relief face, stone powder core and fiber mesh

Where This Sandstone Look Works

  • Spa, wellness and massage rooms
  • Boutique hotel rooms, lobbies and corridors
  • Bedroom headboard walls and living room feature walls
  • Tea houses, bakeries and quiet cafes
  • Curved reception counters and niches
  • Courtyard walls and sheltered outdoor corners

The waterproof, mold proof face is a practical match for humid wellness areas, and the flame retardant stone powder body suits public rooms. If a project calls for a specific fire rating, send us the requirement and we will confirm what can be supplied.

Sand toned flexible stone cladding on a commercial entrance wall
Pale stone look wall in a bathroom setting and on an outdoor shop front

Putting It on the Wall

Choose a base wall that is dry, flat and free from loose dust. Then:

  1. Apply glue over the back of the sheet.
  2. Set the sheet on the wall, pressing the ribs flat as you go.
  3. Line the joint edges with tape.
  4. Fill the gaps with grout.
  5. Lift the tape once the grout is dry.

When the ribs run in one direction, match them across joints so the lines continue without a break. Metal shears or similar hand tools are enough for trimming.

Fitting steps for ribbed flexible stone tile using glue, tape and grout

Workshop Process and Sampling

Each sheet passes through mixing, coating, molding, spraying and film covering before it is checked and packed. Free samples let you feel the ribs and see the sand tone in your own light before ordering. Custom colors and relief depth can be discussed for project quantities.

Flexible stone panel production steps from raw material mixing to film removal

Questions and Answers

Does the ribbed surface collect dust?

Deep grooves can hold some dust, so a soft brush or a damp cloth is a good way to keep them clean. The sealed face resists water and household stains.

Can the ribs follow a curved wall?

Yes. The sheet bends by hand and the ribs bend with it. Tell us the radius of the curve and we will suggest a thickness.

Is the sand beige color available in other tones?

Yes. The flexible stone range includes several colors, and custom shades can be arranged for projects.

Can I use it in a bathroom or spa?

The face is waterproof and mold proof with only 0.5% water absorption. Make sure the joints are grouted well during fitting.

How do I order samples?

Free samples are available. Send us your delivery address and the size and finish you want to see.

Request a free sample, a quotation or a custom color of this ribbed sand beige flexible sandstone tile. Send your wall size, curve details and project type, and we will recommend the right thickness and quantity.

Haining Longtime Industry Co., Ltd is China Wholesale Ribbed MCM Flexible Sandstone Tile Bendable Soft Stone 3D Wall Panel Suppliers and Ribbed MCM Flexible Sandstone Tile Bendable Soft Stone 3D Wall Panel Company, established in 2005, our factory started with producing PVC Ceiling and Wall Panels, and has grown to be a professional China PVC ceiling panels manufacturer and a wholesale PVC panels factory, committed to providing our customers with high-quality products and services. After 20 years of development, we now own 5 large factories: Haining Halong PVC Ceiling Factory, Haining Longtime Film Factory, Guangxi PVC Wall Panel Factory, Indonesia PVC Wall Panel Factory, and Vietnam PVC Wall Panel Factory. Our main products include: PVC Ceiling Panels, PVC Wall Panels, WPC Wall Panels, Hot Stamping Foil, PVC Lamination Film, SPC Flooring, WPC Decking, and other related products. Our annual sales can reach up to 35 million USD. We offer Ribbed MCM Flexible Sandstone Tile Bendable Soft Stone 3D Wall Panel for sale.
Haining Longtime Industry Co., Ltd.

About Us

Established in 2005, our factory started with producing PVC Ceiling and Wall Panels, and has grown to be a professional China PVC ceiling panels manufacturer and a wholesale PVC panels factory, committed to providing our customers with high-quality products and services. After 20 years of development, we now own 5 large factories: Haining Halong PVC Ceiling Factory, Haining Longtime Film Factory, Guangxi PVC Wall Panel Factory, Indonesia PVC Wall Panel Factory, and Vietnam PVC Wall Panel Factory. 

Our main products include: PVC Ceiling Panels, PVC Wall Panels, WPC Wall Panels, Hot Stamping Foil, PVC Lamination Film, SPC Flooring, WPC Decking, and other related products. Our annual sales can reach up to 35 million USD.

Honour

  • Certificate
  • Certificate
  • Certificate
  • Certificate
  • Certificate

News