+86-17757302351

Wholesale Thin MCM Flexible Slate Tile in Cocoa Brown Lightweight Wall Cladding Suppliers

Home / Product / Stone Wall Panels / Soft Stone Wall Panels / Thin MCM Flexible Slate Tile in Cocoa Brown Lightweight Wall Cladding

Thin MCM Flexible Slate Tile in Cocoa Brown Lightweight Wall Cladding

Cocoa brown flexible stone sheet with a fine crackle surface and a soft matte face. A thin MCM tile for warm feature walls, shopfronts and curved surfaces.

  • Body: mineral powder, stone powder and plant fibers with a fiber mesh back
  • Sheet size: 610 x 1220 mm or 1200 x 2400 mm
  • Thickness: 2 mm to 8 mm
  • Density: about 2.6 g/cm3, water absorption 0.5%
  • Strength: compressive strength up to 80 MPa (varies by model and substrate)
  • Surface care: waterproof, stain resistant, mold proof, flame retardant
  • Fitting: glue and grout, up to 30% faster than natural stone

Free samples available. Ask about custom shades.

  • Specification
  • About Longtime
  • Contact Us

Cocoa Brown Flexible Slate Look Stone Tile for Warm Feature Walls and Curved Surfaces

A calm, dusky cocoa tone with a hint of taupe makes this flexible stone tile an easy match for rooms that want depth without harshness. The face is covered in a fine network of crackle lines and short vertical marks, so it reads as weathered, slate-like stone rather than a flat painted board. Under changing light the shading moves across the relief, which keeps a large wall from looking plain.

The tile is a thin MCM soft stone sheet. It bends by hand, so it can be wrapped around columns, arched openings and gently curved walls, then trimmed to fit with simple tools. Compared with cut stone slabs it is far lighter, which makes a full sheet easier to carry up stairs, lift into position and fix on site.

Flexible cocoa brown stone tile style sheet bending softly over a ledge

Surface, Tone and Styling

The matte finish does not reflect light in sharp patches, so the cracked texture stays visible from both near and far. A deep neutral brown pairs well with brass trim, warm timber, black metal frames and soft wall lighting. It also works as a quiet backdrop for artwork, shelving and signage. If you need a lighter or deeper version, other shades in the flexible stone range include sand, terracotta, grey and travertine tones, and custom colors can be discussed for project orders.

Technical Data

Product type Flexible stone (MCM) soft tile
Body Natural mineral powder, stone powder, plant fibers and other lightweight flexible materials
Density Approx. 2.6 g/cm3
Compressive strength Up to 80 MPa, varies by model and substrate
Water absorption 0.5%
Waterproof and stain resistance Excellent
Standard sizes 610 mm x 1220 mm; 1200 mm x 2400 mm
Thickness range 2 mm - 8 mm
Installation speed Up to 30% faster than traditional stone

Built in Layers, Pressed at High Density

Each sheet is pressed in one piece. The outer layer holds the stone relief and shrugs off water and sun without fading. Beneath it sits natural inorganic stone powder, which gives the sheet its firm, aging-resistant body, and a fiber reinforced mesh at the back lets the sheet flex without breaking up. Because the layers are pressed together, the sheet does not shed powder when handled or cut.

Three layer build of a flexible stone tile with textured face, stone powder core and mesh back

Where a Brown Stone Look Fits Best

The warm tone and sturdy surface suit spaces that see a lot of visitors:

  • Hotel lobbies, lounges and corridors
  • Restaurant, cafe and bar feature walls
  • Boutique and showroom backdrops
  • Reception desks and counter fronts
  • Stairwell and curved wall surfaces
  • Building entrances, columns and outdoor accent walls
Brown stone look wall cladding beside a spiral stair and behind a retail counter
Flexible stone cladding on a commercial entrance wall above a glass front

Fitting Guide

Check that the base wall is dry, flat and free of loose dust before you begin. Then:

  1. Dot or spread glue across the rear face of the sheet.
  2. Lift the sheet onto the wall and press from the middle outward.
  3. Tape both sides of every joint to protect the face.
  4. Brush grout into the joint gaps.
  5. Pull off the tape when the grout has dried.

A pair of metal shears is enough to cut openings for sockets and switches. Since sheets are thin and light, one installer can often handle a panel, and the whole job can run up to 30% faster than natural stone.

Five fitting steps for cocoa brown flexible stone tile using glue, tape and grout

Made in a Controlled Workshop

Sheets are mixed, coated, shaped in molds, sprayed and covered with protective film before the film is peeled off for inspection. Several production lines and a full supply chain mean we can ship sample sets and project quantities with the same finish. If you need a specific color, relief depth or packing method, send the details with your enquiry.

Workshop stages for flexible stone tile from mixing to film removal

Common Questions

Does a dark brown panel suit a small room?

It can. Many designers use it on a single feature wall and keep the other walls light. Ask for a sample and view it in the room under your own lighting first.

Can the tile be fitted on curved columns?

Yes. The sheet is flexible and bends by hand. A thinner sheet follows a tighter curve, so tell us the column size and we will suggest a thickness.

Is it safe to use in damp areas?

Water absorption is only 0.5% and the surface is waterproof and mold proof, so it is suited to humid spaces. Seal the joints properly during fitting.

What does the flame retardant rating mean for my project?

The body is made from inorganic stone powder and is designed to be flame retardant. For a specific rating or test report, send us your local requirement and we will confirm what can be supplied.

Can I see the real color before I order?

Yes. Free samples are available, and custom shades can be arranged for project orders.

Request a free sample, a quotation or a custom shade of this cocoa brown flexible stone tile. Tell us your wall size, surface shape and project location, and we will recommend the right thickness and quantity.

Haining Longtime Industry Co., Ltd is China Wholesale Thin MCM Flexible Slate Tile in Cocoa Brown Lightweight Wall Cladding Suppliers and Thin MCM Flexible Slate Tile in Cocoa Brown Lightweight Wall Cladding Company, established in 2005, our factory started with producing PVC Ceiling and Wall Panels, and has grown to be a professional China PVC ceiling panels manufacturer and a wholesale PVC panels factory, committed to providing our customers with high-quality products and services. After 20 years of development, we now own 5 large factories: Haining Halong PVC Ceiling Factory, Haining Longtime Film Factory, Guangxi PVC Wall Panel Factory, Indonesia PVC Wall Panel Factory, and Vietnam PVC Wall Panel Factory. Our main products include: PVC Ceiling Panels, PVC Wall Panels, WPC Wall Panels, Hot Stamping Foil, PVC Lamination Film, SPC Flooring, WPC Decking, and other related products. Our annual sales can reach up to 35 million USD. We offer Thin MCM Flexible Slate Tile in Cocoa Brown Lightweight Wall Cladding for sale.
Haining Longtime Industry Co., Ltd.

About Us

Established in 2005, our factory started with producing PVC Ceiling and Wall Panels, and has grown to be a professional China PVC ceiling panels manufacturer and a wholesale PVC panels factory, committed to providing our customers with high-quality products and services. After 20 years of development, we now own 5 large factories: Haining Halong PVC Ceiling Factory, Haining Longtime Film Factory, Guangxi PVC Wall Panel Factory, Indonesia PVC Wall Panel Factory, and Vietnam PVC Wall Panel Factory. 

Our main products include: PVC Ceiling Panels, PVC Wall Panels, WPC Wall Panels, Hot Stamping Foil, PVC Lamination Film, SPC Flooring, WPC Decking, and other related products. Our annual sales can reach up to 35 million USD.

Honour

  • Certificate
  • Certificate
  • Certificate
  • Certificate
  • Certificate

News