+86-17757302351

Wholesale MCM Flexible Travertine Soft Stone Panel Bendable Waterproof Cladding Suppliers

Home / Product / Stone Wall Panels / Soft Stone Wall Panels / MCM Flexible Travertine Soft Stone Panel Bendable Waterproof Cladding

MCM Flexible Travertine Soft Stone Panel Bendable Waterproof Cladding

Factory direct MCM flexible travertine soft stone panel in a light greige tone. Ultra-thin, bendable and lightweight, it gives interior walls and exterior facades a real travertine look without the weight of natural stone.

  • Material: Natural mineral powder, stone powder and plant fibers with fiber reinforced mesh
  • Sizes: 610 mm x 1220 mm and 1200 mm x 2400 mm
  • Thickness: 2 mm to 8 mm
  • Water absorption: 0.5%
  • Performance: Waterproof, mold proof, stain resistant, fireproof
  • Use: Indoor and outdoor wall cladding, curved walls, counters
  • Service: OEM/ODM and free samples available

Contact us for free samples, custom colors and project pricing.

  • Specification
  • About Longtime
  • Contact Us

MCM Flexible Travertine Soft Stone Panel for Interior and Exterior Wall Cladding

This MCM flexible travertine soft stone panel gives walls the warm look of natural travertine without the weight, the heavy handling or the long installation time that real stone needs. The face shows soft vertical veining and fine natural pores in a light greige tone, so a finished wall looks calm, refined and consistent from close range and from across the room.

Each sheet is only 2 mm to 8 mm thick and can be bent by hand, which lets it follow flat walls, curved walls, rounded columns and tight corners where rigid stone cannot go. It is pressed from natural mineral powder, stone powder and plant fibers, then reinforced with a fiber mesh, so the sheet stays dense, does not shed powder and keeps its shape on the wall.

LONGTE makes this flexible travertine veneer in its own workshop and supplies it factory direct to developers, contractors, interior designers, importers and distributors. Free samples and OEM/ODM customization are available, so you can check the color and texture in your hand before placing a project order.

Technical Specifications

Product Name Flexible Stone (MCM) travertine soft stone panel
Material Composition Natural mineral powder, stone powder, plant fibers and other lightweight flexible materials, with fiber reinforced mesh
Physical Density Approx. 2.6 g/cm3
Compressive Strength Up to 80 MPa (varies by model and substrate)
Water Absorption 0.5%
Waterproof / Stain Resistance Excellent
Standard Sizes 610 mm x 1220 mm; 1200 mm x 2400 mm
Thickness Range 2 mm - 8 mm
Installation Efficiency Up to 30% faster than traditional stone
Surface Look Light greige travertine grain with soft grey veins
Customization OEM/ODM, free samples
Ultra-thin flexible stone wall panel showing texture, flexibility and easy cutting

Why Buyers Choose This Flexible Travertine Wall Panel

Compared with natural travertine slabs and ceramic tiles, a soft stone panel is lighter, easier to cut and far quicker to put up. These are the points our customers mention most often:

  • Lightweight: thin sheets are easy to carry, lift and fix, and they put less load on the building structure than natural stone.
  • Bendable: the panel wraps around arches, curved walls and rounded corners without special machining.
  • Real stone texture: the pressed surface reproduces the grain and pores of travertine in fine detail.
  • Waterproof and mold proof: a dense body with only 0.5% water absorption resists moisture and wipes clean.
  • Fireproof and flame retardant: an inorganic stone powder body is chosen for safer wall finishes in public and commercial spaces.
  • Easy to cut: simple hand tools such as metal shears are enough for trimming around sockets, windows and edges.
  • Eco-friendly and recyclable: made from mineral powder and plant fibers instead of quarried stone blocks.
Soft and flexible stone wall panel bending over a ledge to show its flexibility

Layered Structure Built for Durability

The panel is made by integrated pressing at high density. The top layer carries the real stone texture and resists water and sunlight, with no fading. The middle layer is natural inorganic stone powder, which keeps the sheet solid, durable and resistant to aging. The base is a fiber reinforced mesh that adds flexibility so the sheet can bend smoothly around curves.

Layer structure of a high density flexible stone panel with stone texture, stone powder and fiber mesh

Fireproof, Waterproof and Wear Resistant

Fire resistance, water resistance and surface wear are the three points most project buyers check first. The stone powder body is designed for flame retardant performance, the sealed surface repels water and household stains, and the pressed face resists scratches and daily wear. If your project calls for a specific fire rating or test standard, send it to us and our team will confirm what we can supply.

Flexible stone panel flame test, water repellency test and scratch resistance test

Colors and Finish Options

This panel comes in a light greige travertine tone with soft grey veins. The same flexible stone range also covers sand, golden, white, cream, blush pink, terracotta red and slate grey finishes, so one supplier can cover the whole wall plan of a hotel, shop or office. Custom colors can be matched through our OEM/ODM service.

Nine color samples of flexible travertine soft stone panels held up outdoors

Where to Use Flexible Travertine Panels

Because the sheet is light, thin and water resistant, it suits both indoor and outdoor decoration:

  • Office and lobby background walls
  • Living room and sofa feature walls
  • Reception desks, bar counters and retail counters
  • Staircase walls and curved surfaces
  • Bathroom and spa walls where moisture resistance matters
  • Shopfronts, building facades and outdoor background walls
Flexible travertine stone panel used on an office entrance background wall
Soft stone wall panel on a staircase wall and a bar counter in a retail space
Travertine look soft stone cladding in a bathroom scene and on an outdoor shopfront wall

Simple Installation Steps

Make sure the wall surface is clean and firm, then follow these steps:

  1. Apply glue evenly on the back of the panel.
  2. Press the panel onto the wall and align it with the neighboring sheet.
  3. Paste masking tape along both sides of each joint.
  4. Fill the gaps with grout.
  5. Remove the masking tape after the grout dries.

Thin, soft sheets are cut and handled with ease, and the whole process can be up to 30% faster than traditional stone, which shortens site time and labor.

Five step installation process for flexible stone wall panels using glue, masking tape and grout

Factory Production and OEM/ODM Service

Every sheet goes through a clear workshop sequence: raw material mixing, coating, mold shaping, spray painting, protective film covering and film removal. The finished panel shows good flexibility and high density. Multiple production lines and a complete supply chain let us support sample orders as well as large project orders, with custom colors, textures, sizes and packaging on request.

Flexible stone panel factory workshop with mixing, coating, mold shaping and film removal steps

Frequently Asked Questions

Can this flexible travertine panel be used outdoors?

Yes. The panel is made for both indoor and outdoor use, with a waterproof, mold proof and sun resistant surface. For facade projects, share your wall type and local climate and we will advise on thickness and fixing.

How thin is the panel and how far can it bend?

Thickness ranges from 2 mm to 8 mm. The sheet bends by hand to follow curved walls and rounded corners. Thinner sheets bend more easily, so tell us the curve you need and we will recommend a suitable thickness.

What sizes are available?

Standard sizes are 610 mm x 1220 mm and 1200 mm x 2400 mm. Other sizes can be discussed for larger orders.

Is the panel fireproof?

The body is made from inorganic stone powder and is designed to be fireproof and flame retardant. If your local building code asks for a specific rating, send us the requirement and we will confirm what we can supply.

Do you offer free samples and OEM/ODM?

Yes. Free samples are available so you can check the color, texture and flexibility yourself. OEM/ODM covers custom colors, textures, sizes and packaging.

Request free samples of this MCM flexible travertine soft stone panel, a price quote or a custom color match. Send us your wall size, climate and project type, and our team will recommend the right thickness and quantity.

Haining Longtime Industry Co., Ltd is China Wholesale MCM Flexible Travertine Soft Stone Panel Bendable Waterproof Cladding Suppliers and MCM Flexible Travertine Soft Stone Panel Bendable Waterproof Cladding Company, established in 2005, our factory started with producing PVC Ceiling and Wall Panels, and has grown to be a professional China PVC ceiling panels manufacturer and a wholesale PVC panels factory, committed to providing our customers with high-quality products and services. After 20 years of development, we now own 5 large factories: Haining Halong PVC Ceiling Factory, Haining Longtime Film Factory, Guangxi PVC Wall Panel Factory, Indonesia PVC Wall Panel Factory, and Vietnam PVC Wall Panel Factory. Our main products include: PVC Ceiling Panels, PVC Wall Panels, WPC Wall Panels, Hot Stamping Foil, PVC Lamination Film, SPC Flooring, WPC Decking, and other related products. Our annual sales can reach up to 35 million USD. We offer MCM Flexible Travertine Soft Stone Panel Bendable Waterproof Cladding for sale.
Haining Longtime Industry Co., Ltd.

About Us

Established in 2005, our factory started with producing PVC Ceiling and Wall Panels, and has grown to be a professional China PVC ceiling panels manufacturer and a wholesale PVC panels factory, committed to providing our customers with high-quality products and services. After 20 years of development, we now own 5 large factories: Haining Halong PVC Ceiling Factory, Haining Longtime Film Factory, Guangxi PVC Wall Panel Factory, Indonesia PVC Wall Panel Factory, and Vietnam PVC Wall Panel Factory. 

Our main products include: PVC Ceiling Panels, PVC Wall Panels, WPC Wall Panels, Hot Stamping Foil, PVC Lamination Film, SPC Flooring, WPC Decking, and other related products. Our annual sales can reach up to 35 million USD.

Honour

  • Certificate
  • Certificate
  • Certificate
  • Certificate
  • Certificate

News