Soft white PU stone panel with a flowing, wind-carved ripple relief. Tall, light and quick to glue up, it turns a large blank wall into a calm sculptural surface.
Tell us the wall size and we will estimate the panel count for you.
Some walls need drama without color. This white rippled PU stone panel gives a big plain wall the look of rock shaped by water and wind: long vertical folds, small pits and gentle ridges that change tone as the light moves across them. In the product photo, a full-height wall of these panels fills a wide hall, and the surface still feels soft rather than heavy.
The finish is a good fit when you want texture but not a loud pattern. Soft white reflects daylight and spot light well, so a lobby, boutique or bedroom wall can look bright by day and sculpted at night.
| Texture | Flowing ripple and rock fold relief |
|---|---|
| Color | Soft white |
| Panel material | Premium PU polymer |
| Series panel size | 60 cm x 120 cm, about 0.72 m² |
| Mounting | Adhesive fixed straight to the base wall |
| Working properties | Waterproof, mold proof, flame resistant, stain resistant |
| Product marks on artwork | CE, RoHS, SGS |
| Supply options | Factory direct, OEM/ODM, free samples |
Real rock cladding needs strong fixings and careful handling. This panel is far lighter, so tall runs of wall can be covered with less labor and without heavy structural support. You get the shadow play of natural relief while staying within what a normal base wall can carry.
Because the board is light and glues on directly, a single installer can set panels without a lifting team. Trim to fit with a cutting tool at ceilings, floor lines and openings. Natural-looking relief can leave tiny seam differences, so use repair paste to blend the joints. A full box comes with free repair paste, and orders under 5 panels have an additional packaging charge.
Concrete, cement, white paint, timber, brick and wallpaper or fabric-covered surfaces can all take these panels when the base is firm and clean. That helps with renovation jobs where you would rather cover an old wall than rebuild it.
White surfaces show marks quickly, so surface care matters. Oil, water and dust do not soak into this panel, and most spots lift off with a tissue or damp cloth. That is helpful for reception walls, cafe backdrops and any wall near a hand-touched route.
The panel surface withstands a lighter flame, and the dense polymer body resists pressure without deforming. Both points are worth checking against your local project requirements, and our team can supply the matching test reports.
Reports are available for high and low temperature behavior, water absorption, formaldehyde-free content and flame retardancy. Ask for the files you need for tender, design review or customs paperwork.
If you like the white relief but want a different pattern, look at moon stone, flowing stone, nebula stone, gravel board and faux stone skin. Large slabs, color pop, gold foil and silver foil can be arranged on request.
One 60 x 120 cm panel covers about 0.72 m². Divide the wall area by 0.72 to get the number of panels, so a 20 m² wall needs around 28. Tall walls and walls with many openings lose more material to cutting, so order a margin above the raw figure.
The finish is soft white. Photos under warm lighting can look slightly cream, so request a free sample to check the tone.
Yes. Panels are light and can be stacked in rows to reach tall walls, with joints planned during layout.
Not always. With textured relief, small seams can remain, so use repair paste for a smoother result.
The panel is waterproof and mold proof. For exterior use, tell us the climate and wall type so we can advise.
OEM/ODM service is available for packaging, branding and pattern requests.
Send your wall measurements and destination through the inquiry form on this page, and we will reply with sample options and a quotation.

Established in 2005, our factory started with producing PVC Ceiling and Wall Panels, and has grown to be a professional China PVC ceiling panels manufacturer and a wholesale PVC panels factory, committed to providing our customers with high-quality products and services. After 20 years of development, we now own 5 large factories: Haining Halong PVC Ceiling Factory, Haining Longtime Film Factory, Guangxi PVC Wall Panel Factory, Indonesia PVC Wall Panel Factory, and Vietnam PVC Wall Panel Factory.
Our main products include: PVC Ceiling Panels, PVC Wall Panels, WPC Wall Panels, Hot Stamping Foil, PVC Lamination Film, SPC Flooring, WPC Decking, and other related products. Our annual sales can reach up to 35 million USD.





You notice a thin line of sawdust along the bottom of a wooden door frame. You tap the jamb, and a chunk of it sinks inward. Termites have spent months feeding on the cellulose in...
View MoreIf you are pricing a feature wall, a hotel corridor, or a bathroom upgrade, the first quote you see is rarely the number that matters. A standard indoor WPC wall panel usually cos...
View MoreLast summer, the backyard looked like a blank sheet of paper. The lawn was patchy, the patio held two folding chairs, and the barbecue was buried behind a pile of tools. The famil...
View MoreYou noticed a small cluster of black dots on the wall next to your bedroom window. You wiped them off with a damp cloth, and for a few weeks the surface looked clean. Then the spo...
View More