Metal Decorative Trim L Shape Wall Corner Protector Tile Edge Trim

L Shape Corner Protector for Tile and Wall Edges

An exposed tile edge or a raw wall corner is the first place to chip, crack or collect knocks. This L shape trim covers that edge with a rigid metal angle, so the corner stays intact and the surface reads as a finished detail instead of a cut line.

The profile has a slim right-angle section that sits flush on the corner. It works as a protector, a decorative border and a transition between two surfaces, all in one piece. The same shape is offered in two surface looks, brushed and mirror, so it can match a quiet matte interior or a bright, reflective one.

Why Choose an L Shape Trim

Edge protection where it counts

Corners take the most contact from furniture, trolleys, luggage and cleaning tools. A metal angle absorbs those hits and keeps tile glaze, panel cores and plaster from breaking away.

A straight, crisp corner line

Hand-finished corners tend to wander. A factory-straight profile gives the whole run the same width and the same sharp edge, even on tall walls.

Two finishes, one shape

Brushed finish carries fine directional lines that hide fingerprints and light scratches. Mirror finish reflects light and makes a small corner stand out. Both finishes share the same dimensions, so they can be mixed across rooms without changing the installation.

Light enough for long runs

The slim section is easy to carry, hold against the wall and align by eye, which saves time on full-height corners.

Finish and Color Range

Need another shade? Share a sample or a color code and the team will check what can be matched.

Product Details

Typical Applications

• Outside corners of tiled bathrooms, kitchens and hallways
• Edges of marble, porcelain and sintered stone cladding
• Corners of wood, WPC, PVC and MCM wall panels
• Borders on cabinets, shelves and display units
• Lobby columns, reception walls and retail interiors

How to Install

1. Measure the corner and cut the trim slightly short of the full height.
2. Smooth the cut end so no sharp burr is left.
3. Dry fit the angle against the corner to check the fit.
4. Apply a suitable construction adhesive along the inside face of the trim.
5. Press the trim into place and hold it straight until the adhesive grips.
6. Remove squeezed-out adhesive and wipe the surface with a soft cloth.

Care and Cleaning

Wipe with a soft damp cloth and mild cleaner. For brushed surfaces, wipe along the grain. Avoid steel wool, strong acid and scouring powder, which can dull the finish.

Factory Supply and Custom Orders

Orders are supplied straight from the production site, with more than 500 profile styles ready in stock. For project orders, the team can adjust width, length, finish and color, and pack the bars in reinforced cartons so edges and surfaces arrive undamaged. Samples let you check color and finish against your own tile or panel before placing a full order.

Frequently Asked Questions

Is this trim only for outside corners?

It is designed mainly for outside corners and exposed edges. For inside corners and panel joints, see the other profiles in the metal decorative trim range.

Which finish is easier to keep clean?

Brushed finish hides fingerprints and light marks better. Mirror finish looks brighter but shows marks sooner, so it suits low-contact areas.

Can the trim be cut to size on site?

Yes. Use a fine-tooth blade or a cutting disc for metal, then smooth the end before fixing.

Can I request a custom width or color?

Yes. OEM/ODM service covers profile size, finish and color. Send your drawing or sample for a quote.

How do I get a sample?

Contact us with your preferred finish and color. Free samples are available.