Bamboo Charcoal Wall Panel with Wood Grain Finish for Interior Decoration

Bamboo Charcoal Wall Panel with a Natural Wood Grain Look

This bamboo charcoal wall panel pairs a realistic wood grain surface with a dense, charcoal-grey core. On the wall it reads as timber, yet it behaves like an engineered board: stable in size, easy to cut and shape, and able to cover large wall areas in fewer pieces. The warm, muted grain suits modern bedrooms, living rooms, hotel corridors and retail interiors where a calm, natural backdrop is wanted.

The panel is produced at our factory and supplied direct. It comes in standard sizes or can be cut to project dimensions, so designers and contractors can plan layouts with fewer joints and less waste.

Specifications

How the Panel Is Built

• Surface texture film: carries the wood grain pattern and helps the surface resist moisture.
• PUR hot melt bonding: the film is laminated with imported PUR hot melt adhesive, giving a firm bond that is not easy to peel apart.
• Bamboo charcoal core: virgin PVC resin, bamboo charcoal powder and wood powder are compressed at high temperature into a dense board.
• Co-extruded base: a high-density layer on the back adds hardness and supports a long service life.

Performance Highlights

Moisture Resistance

The film surface resists moisture and wipes clean, which helps in bedrooms, restaurants and other rooms exposed to everyday humidity.

Scratch and Wear Resistance

A hard surface over a dense core stands up to everyday scuffs, making the panel practical for busy commercial walls as well as family homes.

Low Emission and Flame Retardant

The board is rated E0 for environmental performance, and no paint is needed on site, so there is no coating odor after installation. B1 grade flame retardant performance suits residential and commercial interiors.

Bendable and Formable

The panel can be heated and bent, and the back can be grooved to form clean right angles or rounded corners.

Cutting, Grooving and Bending

Back grooving lets the board fold into sharp 90 degree corners, while heat bending creates smooth curves at any angle. Column wraps, bay corners and curved feature walls can be finished from a single board instead of several joined pieces.

Joint Options Between Boards

• Seamless joint: boards meet flush for a continuous grain across the wall.
• T-profile joint: a slim trim strip sits between boards and gives a crisp dividing line.
• I-shaped joint: a narrow insert bridges the seam for a tidy, uniform finish.
• Natural gap joint: a small reveal between boards creates a deliberate panel pattern.

Installation

These panels can be installed directly on rough walls, which shortens on-site preparation. With lengths up to 3 m, a single board can often run the full wall height, so there are fewer horizontal seams to plan and finish.

Wood Grain Colors

The wood grain series includes light tones such as solid wood, original wood and birch, mid tones such as antique oak and yellow oak, and deeper shades such as burmese rosewood. Metal and stone finishes are also available in the same panel range, so a whole project can be matched from one supplier.

Where to Use It

• Bedroom headboard and bedside walls
• Living room TV walls and sofa backdrops
• Hotel rooms, corridors and lobbies
• Offices and meeting rooms
• Restaurants, cafes and retail shops
• Cabinet and wardrobe surfaces

See Slotting and Bending in Action

Customization, Samples and Ordering

We supply this panel factory direct and accept OEM and ODM orders. Lengths, colors and finishes can be adjusted for larger projects, and our team can help with wall layout planning. Free samples are available so you can check the grain, color and edge quality before ordering. Use the Contact Us button above to tell us your wall size, quantity and preferred finish.

Frequently Asked Questions

Is this panel made of real wood?

No. The wood grain comes from a texture film laminated over a bamboo charcoal composite core, giving the look of timber with the stability of an engineered board.

What sizes are available?

The standard width is 1.22 m, with thickness of 5 mm or 8 mm and lengths of 2.44 m, 2.6 m, 2.8 m or 3 m. Custom lengths are possible for bulk orders.

Can the panel be bent around corners?

Yes. Heat bending creates curved corners, and back grooving creates clean right angles.

Can I get a sample before placing an order?

Yes. Free samples are available, and our team can arrange them once you contact us.