What are the application environment requirements of pvc wood grain film?- Haining Longtime Industry Co., Ltd.

The pvc lamination film is made of natural color and texture of oak, elm, ash, sapele, walnut, maple, pine, mahogany, red sandalwood and other woods as the material, and pvc is printed as the base material. High-end decorative mask! Natural color, gorgeous color, rich patterns, elegant style, and very suitable for interior doors, wardrobes, ceilings, walls and other surface decoration. At the same time, PVC decorative film has the advantages of moisture-proof, anti-corrosion, flame retardant, easy to clean, easy to install, green and environmental protection!

The pvc wood grain film is based on the polyvinyl chloride calendered film, which is printed with a wood grain pattern by a printing roller, compounded with a transparent film, and then pressed with a woody "brown eye" pattern to obtain a wood grain film. The wood grain film is pasted on the plastic board, wood board, steel plate and other boards, giving people a real wood feeling, and achieving the effect of "fake the real". The wood grain pattern can be designed according to the annual ring patterns of different tree species, and the printing roller can be engraved and printed by a multi-color printing machine to obtain a wood grain film reflecting a variety of trees. Therefore, pvc wood grain film is an excellent decorative film.

When using pvc wood grain film decorative film for decoration, the construction environment and the application environment of the product will be considered. Applying the film in the right place will do more with less, and in the wrong place will cause additional losses. Let's analyze it today

First of all, according to a set of data, I will explain the application environment requirements of pvc wood grain film decorative film:

1. Applicable temperature range: 12°c - 38°c, in this temperature range, film construction can be carried out. (In particularly humid places, the construction surface needs to be dried first. If there will be serious moisture inside the construction surface, try to avoid filming.)

2. When targeting special-shaped surfaces, a hot air blower can be used to increase the temperature of the wood grain film. If the temperature is too low, there will be problems of expansion and failure of pasting.

3. When using the hot air blower, do not adjust to the high temperature file. If the temperature is too high, the decorative film of the wood grain film will become soft. Causes a lot of trouble to the sticker.

4. When the film is applied to the special-shaped position, some wood grain film decorative films will appear whitening. Before the filming operation, it can be adapted to the low temperature heating of the hot air blower before the filming operation. When operating, do not press with sharp objects to avoid damage.

To sum up: when pasting pvc wood grain film, do not heat it with too high a temperature for the pursuit of speed. This will not only not reduce the construction time, but will cause more adverse effects.

Haining Longtime Industry Co., Ltd., a professional manufacturer and service provider of decorative materials, provides one-stop service of production/design/installation according to the actual needs of the project. Welcome to consult and cooperate.
wood grain pvc lamination film